rezident
Вождь в отставке
Откуда:
Пермь
Сообщений:
4548
Регистрация:
31.03.2004
|
От 109B40 мануала нет. Есть только от 109B2.
| Цитата: |
Access Service mode (burn in mode) :
Access Service Mode & Burn in mode
Firstly, get into Factory Adjustment Mode.
Push LEFT & RIGHT buttons at the same time for
over 15 seconds and release them.
The factory message appears at the bottom of the
main OSD menu. (for example : 109B2 V1.52 20000619;
00115 is M.T.B.F. in HOUR unit)
SERVICE MODE
SERIAL NO: TY 123456
HOURS : 00021
FACTORY VER 1.01 990706
109B2 V1.52 20000619
00115
NO SIGNAL INPUT
- Disconnect the Interface cable of the monitor.
- Push LEFT & RIGHT buttons at the same time, then power
ON.
- If it is successful, the signal " "
comes on the screen later.
(Background is white.).
Exit "burn in MODE" :
- Reconnect the interface cable to PC, then the "burn in MODE"
disappear. |
Может как-то эта информация поможет?
|
| 23:15 22-04-2005
|
|
